Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

Giant Giant Toe Straps
$7.00
Giant's Giant Toe Straps are made of durable nylon with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
Crank Brothers Highline Sticker Kit
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Dimension Basic Toe Clips
$7.99
Dimension Nylon Toe Clips. Included instructions account for toe strap installation, but straps must be purchased separately - Toe straps are NOT included - Sold as a pair
Dimension Basic Toe Straps
$7.99
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm
Crank Brothers Shoe Shields
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Crank Brothers Tread Contact Sleeves
$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Dimension Pro Toe Straps
$9.99
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
Spank Pedal Replacement Bushing Kit D
$10.00
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
Wheels Manufacturing Inc. Pedal Washers
$10.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Exustar E-CK2B Cleat Covers
$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
Dimension Mini Toe Clips
$10.95
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
Dimension Toe Clips & Straps Set
$10.99
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
Crank Brothers 5050 Pin Kit
$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Dimension Synthetic Leather Toe Straps
$11.99
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - Poly leather (vegan) toe strap - Velvet finish - 450mm length
Exustar E-CK1B Cleat Covers
$12.79
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Delta Foot Fenders
$12.99
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Giant AC Toe Clips and Straps Set
$14.00
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.
Crank Brothers Traction Pads for Candy 7/11
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers Traction Pads for Mallet E
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Giant Nylon MTB Pedals
$14.99
Features - Chromoly spindle - Toe clip compatible
Dimension Leather Toe Straps
$15.90
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 430mm length
MKS Steel NJS Toe Clips
$15.90
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
Bontrager Road Clipless 9 Degree Pedal Cleat Set
$15.99
Get that fresh cleat feel These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals. Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals - Directly compatible with Bontrager Comp Road pedals - Set includes 1 pair
Exustar E-BSL11 Cleat Set
$15.99
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
iSSi Thump Replaceable Pin Kit
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Exustar E-RSL11 Cleat Set
$18.00
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
The Shadow Conspiracy Surface Pedals
$18.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks. - Injection-molded nylon-composite body - Heat-treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover - 9/16"
DMR Vault Flip Pins
$19.90
- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
Fyxation Gates Nylon Platform Pedals
$19.95
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
Page 1 of 5 Next page