Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
• 3D forged 6061 aluminum body with oversize box cross-section • ± 8° requires fewer spacers • 46mm wide 6061 aluminum faceplate • Steel hardware
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
$32.00 - $34.99
Giant's Adjustable Angle Stem gives you the custom fit. The 31.8mm handlebar diameter works nicely with modern bars. Place your handlebars high for upright, easy-riding comfort, or go low for a more forward, aggressive position.
$29.99 - $32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.
$40.00 $89.99 56% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
Giant is a world leader in carbon and their Contact SLR Aero Integrated Handlebars are as masterfully engineered and performance-enhancing as they are beautiful. They boast an ultralight one-piece, carbon handlebar/stem combo for the power transfer to climb more easily, jump out of the pack with ease and sprint for the win. They feature Giant's OD2 carbon technology for superior cornering stiffness and steering precision and come in a complete size run for finding your perfect fit. This dream bar/stem combo has rustproof stainless-steel stem bolts and it is also compatible with clip-on aero bars should you want to go even faster.
Features - Material: Ultra-light Aero carbon composite - Length: 70mm / 80mm / 90mm / 100mm / 110mm / 120mm - Fit: 31.8mm (OD2), shim 28.6mm (1 1/8") steerer tube - Extra: Titanium hardware, +/-8° adjustable rise - Weights: 135g, 138g, 141g, 146g, 149g, 154g
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Product details - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
All Mountain strength and stiffness...trail tuned! Spank Industries' OOZY Trail Stem offers all the performance and confidence of a gravity stem, in a highly weight-sensitive, trail-tuned geometry package. 3D-forged and CNC weight-optimized, the OOZY Trail stem comes in popular lengths, with an ultra-short stack height and true zero degree rise. Chamfered barclamps reduce stress risers in the critical bar/stem interface, and ultra-light spacer and sealed top-cap (included), make set-up a breeze. The OOZY Trail Stem's characteristic hourglass sectional profile and wide stance enhance torsional stiffness and integrates beautifully with modern frame designs. Weight, performance, aesthetics and great value...the OOZY Trail Stem has it all. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 3D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 50 / 65 / 75 - Rise (mm): 0 - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): +-150 (50mm) / +-170 (65mm) / +-180 (75mm) - Finish: Shot Peen anodized, CNC/Laser etched logos
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style. - 3D forged and CNC machined from AL6061/T9 - 4-bolt cold forged front clamp - 40mm clamp stack height - Weight: 149g
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Lengths: 35 - 110mm - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)
Page 1 of 5 Next page