12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
$165.00 - $185.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inches\u001D or more
The Yakima KayakStacker lets you and your pals paddle to the max. Featuring vinyl-coated steel posts with versatile arrow-top hooks to quickly and easily tie down boats. Heavy duty straps with coated metal buckles protect both your boat and vehicle. - Non-scratch vinyl-coated steel posts - Fits Yakima round and square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Carries up to 4 whitewater boats - Minimum crossbar spreads of 30” or more TECHNICAL SPECS - Weight: 6.00 lbs - Dimensions: L 19.00” x W 5.00” x H 22.00”
$48.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
$9.99 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
$219.00 - $229.00
The Yakima RailBar is the premium crossbar choice for vehicles with factory-equipped raised siderails. This crossbar with integrated and easy-to-use towers has no bar overhang, so your vehicle will have a clean, modern aesthetic, looking like it came from the factory with the RailBars already installed. The sleek low-profile shape of the crossbar and its seamless integration to your vehicle’s siderails maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all of Yakima's mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two RailBars. Consult Yakima's Fit My Vehicle Guide (www.yakima.com) to determine which RailBar sizes are required for your specific vehicle. Product details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to you vehicle with our SKS system (sold separately)
Yakima's RailGrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The RailGrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
$479.00 - $579.00
Long, narrow and sleek, Yakima's SkyBox 16 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. Specs - Dimensions: 81 x 36 x 15 inches - Capacity: 16 cubic feet - Yakima SKS locks included - Minimum crossbar spread: 24 inches - Weight: 47 pounds
Yakima's Viper bike mount has a rugged die-cast head that easily accepts and securely grips almost every quick-release fork, even those with disc brakes. For super easy mounting, it includes an ergonomic long-throw quick release and a ratcheting wheel strap. Plus, the Viper's long tray works great on vehicles with short roof lines. The Viper fits on round- and square-bar racks, too.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in
$39.00 - $49.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
The proven Yakima tower for cars with nothing up top, the Q Towers pair with Q Clips to turn a naked roof vehicle into a versatile pile-it-on hauling machine. Durable, simple to install, and super-secure, these work with our RoundBars to get you where you want to go. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Works with the classic Yakima RoundBar - Four-way movement delivers a more solid fit - Padded base aids grip and helps preserve your paint job - Fast and easy tool-free installation and removal - Easily locks to you vehicle with our SKS system (sold separately) Product Specs: - Weight: 3.97 lbs./Pair - Dimensions: L 5.50 in x W 2.50 in x H 5.50 in - Limited Lifetime Warranty
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Fitting kit required for perfect fit of the roof rack to a specific car.
Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter
An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles. - Enables transportation of wheels with 12-15 mm thru-axle forks
Page 1 of 2 Next page